Will Xbox 360 Controller Work On Pc

It wasn't that long ago that trying to connect a controller to your PC was either impossible or yous needed plenty of wires and cords to become it done. However, new technology has finally made it easier to connect your controller to your PC by using Bluetooth and similar methods.

Syncing your Xbox 360 Controller is not an exception, and even older models should connect to your laptop or desktop without too much problem. Here is a basic rundown of how to connect an Xbox 360 controller to your PC.

Plug in your wireless receiver

This section but applies to those with wireless controllers. If you lot've got a wired Xbox 360 controller, skip straight toInstall software.

For those of you that own wireless Xbox 360 controllers, connecting to a PC isn't equally straightforward as simply plugging in the device. Starting time off, you'll need to purchase a capable receiver, and then run the proper setup wizard.

If you lot don't already have a receiver, they typically cost between $ten and $20. The official Microsoft version volition cost a bit more than than that, merely at that place are many third-party versions available that work perfectly well.

After purchasing the wireless receiver, connect it to a compatible USB port on your computer (see Figure A below). Once plugged in, a light-green low-cal will appear on the receiver indicating the device is working properly.

Install software

For the wireless gaming receiver and the wireless Xbox 360 controller to properly sync with one another, users must download the necessary software via Microsoft's website, or the arranged installation disc packaged with their receiver.

If y'all have the aforementioned installation CD (probably not, but it'due south possible), insert it into your PC'due south chief optical drive and follow the on-screen wizard. Y'all may need to restart your estimator. If not, y'all can download from the Xbox 360 Wireless Controller for Windows link; if wired, select Xbox 360 Controller for Windows instead. Choose which version of Microsoft Windows yous're using — the Windows 7 drivers will work for Windows eight and Windows 10 — select the operating organization language and click Download.

Once the download screen pops up, striking Runand allow the Xbox 360 Accessories Setup program to install the required files. Once again, yous may be required to restart your computer upon completion of the install.

Syncing the controller

If you're using a wired controller, just plug it in. You're practiced to go. Coil down toTesting the Controller to make certain everything is working correctly.

If not, you'll need to connect the wireless Xbox 360 controller with the receiver plugged into your computer. To do so, beginning turn on the controller by property downwardly the Xbox Guide button in the eye of the controller, and wait for the green backlight to turn on. Afterward, press the connect button on meridian of the wireless receiver (Figure B) until information technology begins to wink green, then press the corresponding button on your controller (Figure C).

The pairing procedure should only accept a few seconds, afterwards which the lite on the receiver will render to solid green and 1 of the four corners around the controller's Guide button volition light up (Figure D). If you're still having issues, check Microsoft's support page for more help.

Testing the controller

In one case the necessary software is installed and the controller plugged in or synced, it'southward fourth dimension to test the connection. Open the Start card on your PC, click the search bill of fare, and expect for "game controllers." You lot should see an choice that reads: Set up USB game controllers.

To ensure that your controller is performance properly, test it by turning the joysticks, pulling on the triggers, and pressing all the buttons. If everything is working correctly, you'll see the corresponding activeness highlighted in the app. Your system should reflect when every button is pushed. If it's reflecting all of your actions, it doesn't matter which area of the screen is lighting up.

If your app isn't fully pairing with your controller and certain buttons aren't lighting upward the screen, yous can check out Xbox's support website for detailed troubleshooting tips.

Kickoff Playing

To keep things convenient, the company labeled the Xbox 360 controller every bit the default setup for most new PC games. You likely won't need to play around with settings or gear up primal bindings to start playing.

We recommend that y'all bank check that your controller is fully paired while y'all load your game because if the ii devices aren't connected, the game won't recognize your controller. Some newer games support quick and convenient controller changes; Users tin can switch to 360 controllers, even if they're in the centre of playing.